The Thick Stuff motocross mx vinyl for decals - the original MX graphic material.
The Thick Stuff dirt bike decals for motocross graphics and MX dirt bike stickers.

TheThickStuff Printable white and gloss clear Protect laminate for motocross graphics and dirt bike decals.

If you wanted the original non-yellowing Belgian thick MX vinyl formulation your only option up until now has been to try and put it together yourself, hunting down the original component recipe and laminating the components ready to print.

Save yourself the time, hassle and cash with the TheThickStuff: the original motocross graphics enduro vinyl for edge to edge MX stickers and dirt bike graphics. You can now buy the only 2 components you will ever need for MX decals: TP160M, TheThickStuff Print Matt or TP180G, TheThickStuff Print Gloss in rolls of 380mm, 750mm, 1350mm and 1500mm withTL400G: TheThickStuff Protect 'Wet Look' Gloss is a NEW laminate product into our range of MX print vinyls. TL400G, TheThickStuff Protect 'Wet Look' Gloss in rolls of 340mm, 730mm, 1330mm and 1480mm, or TL500G, TheThickStuff Protect in rolls of 340mm, 730mm, 1330mm and 1480mm.

ALSO AVAILABLE: TheThickStuff MX Kit Templates and TheThickStuff Plastic Cleaner and TheThickStuff Glue Remover.

TP160M - TheThickStuff Print Matt
Matt white print vinyl with grey extra strong LSE adhesive for dirt bike panels

A 160µ (6.3mil) matt white 3 year vinyl with the "original" Thick Stuff adhesive that has been tried and tested for over a decade.
TheThickStuff Print Matt vinyl can be printed on any solvent, eco-solvent, UV or even latex printer and we have the colour profiles to help you hit the colours more easily.
TP160M has a Matt finish for quicker printing and drying, and a thinner face film that improves conformability.
The glue is not a standard LSE (Low Surface Energy) adhesive, it is the original and still the best glue for MX graphics, with good initial tack that will get stronger over time. Tough enough to be applied in the cold and wet as well as the middle of summer.

TP180G - TheThickStuff Print Gloss
Gloss white print vinyl with extra strong LSE adhesive for dirt bike panels

A 180µ (7.0mil) gloss white 3 year vinyl with the "original" Thick Stuff adhesive that has been tried and tested for over a decade.
TheThickStuff Print Gloss vinyl can be printed on any solvent, eco-solvent, UV, Gerber Edge, or even latex printer, and we have the colour profiles to help you hit the colours more easily.
The glue is not a standard LSE (Low Surface Energy) adhesive, it is the original and still the best glue for MX graphics, with good initial tack that will get stronger over time. Tough enough to be applied in the cold and wet as well as the middle of summer.

TL400G - TheThickStuff Protect Laminate
Gloss clear ‘wet look’ laminate for protecting graphics printed on TP160M or TP180G TheThickStuff Print vinyls

A high gloss 400µ (16mil) ultra clear ‘wet look’ laminate. Once again the original formulation of thick glossy clear with a double coat of adhesive.
TheThickStuff Protect wet look film can be applied by hand or through a laminator and is durable enough to feature on GP bikes. The addition of UV inhibitors in both the film and adhesive ensures the graphic will not yellow with age.

When the products are combined they have history and will work for any off road bike.

If you have a “print and cut” wide format printer the final laminated product, although nearly 600µ (24mil) thick, can still be cut using a sandblast stencil blade, such as the Roland ZEC-U1715 blade.

TL500G - TheThickStuff Protect Laminate
Gloss clear ‘wet look’ laminate for protecting graphics printed on TP160M or TP180G TheThickStuff Print vinyl

As thick as we can make it at 520µ (20.5mil). Once again the original formulation of thick glossy clear with the same adhesive we use on the TheThickStuff Print vinyl.
The ‘wet look’ TheThickStuff Protect film can be applied by hand or through a laminator and is durable enough to feature on GP bikes. The addition of UV inhibitors in both the film and adhesive ensures the graphic will not yellow with age.

When the products are combined they have history and will work for any off road bike.

If you have a"print and cut" wide format printer the final laminated product, although nearly 700µ (27.6mil) thick, can still be cut using a sandblast stencil blade, such as the Roland ZEC-U1715 blade.


Our customers tell us that they don't have time to leave the printed graphics to"outgas" for 24-48 hours before lamination and then leave another 24 hours after laminating before cutting, so the TheThickStuff 2 part system has been designed to be tough enough to print, laminate, and trim in the same day.

How it comes:

TP160M - TheThickStuff Print Matt
A 160µ (6.3mil) matt white 3 year vinyl with the "original" TheThickStuff glue is in standard 45M (147') rolls in 380mm (15"), 750mm (29.5"), 1350mm (53") and 1500mm (59") widths. If this is too much for you we will supply as little as part rolls of 1M at a surcharge.
PRICE:
Roll 380mm (15") x 45M (147') = £152.50 (excl. VAT)
Roll 750mm (29.5") x 45M (147') = £295.00 (excl. VAT)

Roll 1350mm (53") x 45M (147') = £560.00 (excl. VAT)
Roll 1500mm (59") x 45M (147') = £590.00 (excl. VAT)

TP180G - TheThickStuff Print Gloss
A 180µ (7.0mil) gloss white 3 year vinyl with the "original" TheThickStuff glue is in standard 45M (147') rolls in 380mm (15"), 750mm (29.5"), 1350mm (53") and 1500mm (59") widths. If this is too much for you we will supply as little as part rolls of 1M at a surcharge.
PRICE:
Roll 380mm (15") x 45M (147') = £152.50 (excl. VAT)
Roll 750mm (29.5") x 45M (147') = £295.00 (excl. VAT)

Roll 1350mm (53") x 45M (147') = £560.00 (excl. VAT)
Roll 1500mm (59") x 45M (147') = £590.00 (excl. VAT)

TL400G - TheThickStuff Protect
A 400µ (16mil) 'wet look' gloss clear 3 year vinyl in standard 35M (82') rolls in 340mm (13.3"), 730mm (28.75"), 1330mm (52.25") and 1480mm (58.25") widths. If this is too much for you we will supply as little as part rolls of 1M at a surcharge.
PRICE:
Roll 340mm (13.3") x 35M (114.8') = £106.00 (excl. VAT)
Roll 730mm (28.75") x 35M (114.8') = £203.00 (excl. VAT)

Roll 1330mm (52.25") x 35M (114.8') = £386.00 (excl. VAT)
Roll 1480mm (58.25") x 35M (114.8') = £406.00 (excl. VAT)

TL500G - TheThickStuff Protect
A 520µ (20.5mil) ‘wet look’ gloss clear 3 year vinyl with the "original" TheThickStuff glue is in standard 25M (82') rolls in 340mm (13.3"), 730mm (28.75"), 1330mm (52.25") and 1480mm (58.25") widths. If this is too much for you we will supply as little as part rolls of 1M at a surcharge.
PRICE:
Roll 340mm (13.3") x 25M (82') = £100.00 (excl. VAT)
Roll 730mm (28.75") x 25M (82') = £190.00 (excl. VAT)

Roll 1330mm (52.25") x 25M (82') = £362.00 (excl. VAT)
Roll 1480mm (58.25") x 25M (82') = £380.00 (excl. VAT)

Bundle deals

Special pricing deals are available for 'bundle' orders, i.e.: 45M of TP180G plus 2 x 25M rolls of TL500G. Further discounts are available for pallet quantities.

Advantages

TheThickStuff Plastic Cleaner and TheThickStuff Glue Remover

We stock our specially formulated TheThickStuff Plastic Cleaner and TheThickStuff Glue Remover - ideal for the perfect MX graphic application.

The cleaner the surface, the better anything will stick so we offer TheThickStuff Plastic Cleaner and TheThickStuff Glue Remover in 60ml spray bottles with atomiser and instructions. These are safe, non toxic citrus based products that are also eco friendly but still work as well as chemical alternatives.

TheThickStuff MX Kit Templates

We have MX graphic kit templates for dirt bike graphics available for purchase on CD and in other formats.

Keeping up to date with manufacturers plastics is a pain.
To help out we can now offer templates for most MX bikes.

We have modern templates for most 2013 bikes in addition to previous years and these can be bought individually for £25 (excl. VAT) or the whole master CD for £400 (excl. VAT). They include major manufacturers such as Honda, Suzuki, Yamaha, Kawasaki, the 'Austrian' bike, Husaberg and Husqvarna.

NEW 2014 template updates covering all 2014 templates that we release are available for £100.00 (excl. VAT) and currently include KX85, YZF250/450, CRF250/450, EXC 2014, Husqvarna FC and TC85 models.

Evo/Vintage MX templates (pre 1989) for classic MX bike kits which can be bought individually for £25 (excl. VAT), part templates for £10 (excl. VAT) or the whole Vintage Template CD for £300 (excl. VAT).

These templates are all custom manufactured for TheThickStuff materials so may not be suitable for use with other materials.
For the full list of available MX templates click here.
The file formats are Adobe Illustrator EPS vector artwork files.

 

We will be delighted to discuss your requirements and offer our expert technical advice and assistance to customers who would like to know more about our MX graphic vinyl materials and specially selected ancillary application products.

You can reach us on: +44 (0)1753 696977 or email us with any enquiries: sales@mxvinyl.com